RM C, 13 / F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK
Rumah ProdukLampu Cap Gauge

ISO 80369-7 Gambar C.3 Konektor Referensi Wanita Untuk Menguji Konektor Kunci Perempuan Luer Eparasi Dari Beban Aksial

ISO 80369-7 Gambar C.3 Konektor Referensi Wanita Untuk Menguji Konektor Kunci Perempuan Luer Eparasi Dari Beban Aksial

    • ISO 80369-7 Fig C.3 Female Reference Connector For Testing Female Luer Lock Connector Eparation From Axial Load
    • ISO 80369-7 Fig C.3 Female Reference Connector For Testing Female Luer Lock Connector Eparation From Axial Load
  • ISO 80369-7 Fig C.3 Female Reference Connector For Testing Female Luer Lock Connector Eparation From Axial Load

    Detail produk:

    Tempat asal: Cina
    Nama merek: Kingpo
    Sertifikasi: Certificate of ISO17025
    Nomor model: ISO 80369-7 Fig C.3

    Syarat-syarat pembayaran & pengiriman:

    Kuantitas min Order: 1
    Harga: To be quoted
    Kemasan rincian: paket karton pengaman atau kotak kayu lapis
    Waktu pengiriman: 7 hari kerja
    Syarat-syarat pembayaran: T/T
    Menyediakan kemampuan: 10 pcs per bulan
    Hubungi sekarang
    Detil Deskripsi produk
    Nama merek: Kingpo Bahan: Baja Kekerasan
    Standar: ISO 80369-7 Kekerasan: HRC58-62
    Garansi: 1 tahun Nama Produk: GAUGE LUER

    ISO 80369-7 Fig C.3 — Female reference connector for testing female luer lock connector for separation from axial load and resistance to overriding

    ISO 80369-7 FIGURE C.1 and C.3 FEMALE LUER REFERENCE CONNECTOR

     

    ISO 80369-7:2016 cancels and replaces the first edition ISO 594-1:1986 and the second edition of ISO 594-2:1998, clauses, subclauses, tables, figures, and annexes of which have been consolidated and technically revised. Because of this, ISO 594 connections must be tested per ISO 80369-7 requirements. Read: Discussion on the change.

     

    Compatibility/Interchangeability...

     

    Between ISO 594/2 Fig 5 and ISO 80369-7 Fig C.1

    The ISO 594/2 Figure 5 Female Luer Reference Conical Fitting is replaced by ISO 80369-7 Fig C.1 Female Luer Reference Connector. The ISO 80369-7 Figure C.1 is identical to the ISO 594/2 Figure 5 Reference Fitting. ISO 80369-7 Fig C.1 and ISO 594/2 Fig 5 are completely interchangeable. If you request a quote for a new ISO 594/2 Fig 5 Reference Connector from us; we will quote an item which will pass both ISO 594 and ISO 80369-7 requirements. It will be DUO-marked and DUO-certified to both specifications.

     

    Between ISO 594/2 Fig 6 and ISO 80369-7 Fig C.3

    The ISO 594/2 Figure 6 Female Luer Reference Conical Fitting is replaced by ISO 80369-7 Fig C.3 Female Luer Reference Connector. The ISO 80369-7 Figure C.3 is identical to the ISO 594/2 Figure 6 Reference Fitting. ISO 80369-7 Fig C.3 and ISO 594/2 Fig 6 are completely interchangeable. If you request a quote for a new ISO 594/2 Fig 6 Reference Connector from us; we will quote an item which will pass both ISO 594 and ISO 80369-7 requirements. It will be DUO-marked and DUO-certified to both specifications.

     

    General Construction Details:

    Keeping with the requirements of ISO 80369-7; the Reference Connectors we sell are from hardened stainless steel. They have design details which are not specified in ISO 80369-7 and which allow connection to test equipment. These design details vary by manufacturer so be sure you understand the configuration before you order the Reference Connector. The ISO 80369 Reference Connectors are an integral part of Luer needle and syringe testing.

     

    Rincian kontak
    KingPo Technology Development Limited

    Kontak Person: Ms.Lynette Wong

    Mengirimkan permintaan Anda secara langsung kepada kami (0 / 3000)

    Produk lainnya