logo
Mengirim pesan
vr
Produk
rincian produk
Rumah > Produk >
IEC 61347-1:2024 Annex H Insulating Barrier Test Equipment with 0.5 N ± 0.1 N Force and 1.25 Times Test Value for Electrical Safety
Produk

Peralatan Pengujian Baterai

Uji lingkungan Chamber

ruang uji iklim

Ruang Kelembaban Suhu

Lampu Cap Gauge

Peralatan Uji

Peralatan Uji IP

Alat Uji IEC62368

Alat Uji Medis

Peralatan Uji Flame

pengujian peralatan cahaya

Pasang Socket Tester

Alat uji listrik keselamatan

Peralatan Uji Kabel

kamar uji debu

Mesin Pengukur Gambar

Sistem Pengujian Motor Listrik

Audio Analyzer
Hubungi kami
sale1@kingpo.hk
+86-769-81627526
Wechat wechat
Hubungi Sekarang
IEC 61347-1:2024 Annex H Insulating Barrier Test Equipment with 0.5 N ± 0.1 N Force and 1.25 Times Test Value for Electrical Safety
  • Nama
  • Nama
  • Nama

IEC 61347-1:2024 Annex H Insulating Barrier Test Equipment with 0.5 N ± 0.1 N Force and 1.25 Times Test Value for Electrical Safety

MOQ: 1
harga: To be quoted
kemasan standar: kotak alat plastik saty atau paket kayu lapis
Periode pengiriman: 35 hari kerja
metode pembayaran: T/t
Kapasitas Pasokan: 200 per bulan
Informasi Rinci
Deskripsi Produk
Informasi Rinci
Tempat asal
CINA
Nama merek
kingpo
Sertifikasi
ISO 17025
Nomor model
IEC 61347-1:2024 Lampiran H
Menyoroti:

IEC 61347-1:2024 Annex H Insulating Barrier Test Equipment

,

0.5 N ± 0.1 N Force Electrical Safety Tester

,

1.25 Times Test Value IEC 61347-1 Test Electrode

Deskripsi Produk
IEC 61347-1:2024 Annex H Insulating barrier test ,Figure H.1 – Test electrode
H.1 General requirements
Solid insulation in direct contact with sharp edges of live parts of printed circuit boards used below a printed circuit and that are used to fulfil the requirements for double or reinforced insulation shall be tested according to Clause H.2 to simulate the stress produced by the soldered part in the printed circuit board.
H.2 Insulating barrier test
The insulating material used to fulfil the requirements for double or reinforced insulation shall be placed between two opposing electrodes. One electrode shall be a flat brass or stainless-steel surface that is placed in contact with the surface of the insulation material to be tested.
The second electrode consists in a cylindrical brass or stainless-steel rods with shape and dimensions according to Figure H.1 .
The electrodes shall be pressed against the insulation material with a force of 0,5 N ± 0,1 N.
The test potential between the two electrodes shall be increased to the test value and the maximum test potential shall be maintained for 1 min. The test value shall be 1 ,25 times the value for double or reinforced insulation as in Table 10.
No flashover or breakdown shall occur during the test.
IEC 61347-1:2024 Annex H Insulating Barrier Test Equipment with 0.5 N ± 0.1 N Force and 1.25 Times Test Value for Electrical Safety 0
IEC 61347-1:2024 Annex H Insulating Barrier Test Equipment with 0.5 N ± 0.1 N Force and 1.25 Times Test Value for Electrical Safety 1
IEC 61347-1:2024 Annex H Insulating Barrier Test Equipment with 0.5 N ± 0.1 N Force and 1.25 Times Test Value for Electrical Safety 2








Tag: 

mesin uji ketahanan abrasi,  

tv signal tester,  

penganalisa keselamatan listrik

Produk yang Direkomendasikan
10A 3 Station IEC60335-1 Alat Uji Melenturkan Video

10A 3 Station IEC60335-1 Alat Uji Melenturkan

Hubungi Sekarang
IEC 60335-2-23 Melenturkan Alat Uji Untuk Koneksi Putar - Alat Perawatan Kulit Atau Rambut Video

IEC 60335-2-23 Melenturkan Alat Uji Untuk Koneksi Putar - Alat Perawatan Kulit Atau Rambut

Hubungi Sekarang
ANSI / BHMA A156.2 Kunci Tes Keamanan Peralatan Keamanan Kunci Tes Sidik Jari

ANSI / BHMA A156.2 Kunci Tes Keamanan Peralatan Keamanan Kunci Tes Sidik Jari

Hubungi Sekarang
IEC 60335-2-80-Gambar 102 Pin Uji Baja Tahan Lama

IEC 60335-2-80-Gambar 102 Pin Uji Baja Tahan Lama

Hubungi Sekarang
Elektronik Pintu Cerdas Aging Uji Stand - Kunci Pintu Cerdas

Elektronik Pintu Cerdas Aging Uji Stand - Kunci Pintu Cerdas

Hubungi Sekarang
1000N Peralatan Uji Keamanan Listrik, Baterai Fotovoltaik Backplate Two-Way Peel Tester

1000N Peralatan Uji Keamanan Listrik, Baterai Fotovoltaik Backplate Two-Way Peel Tester

Hubungi Sekarang
BS EN14808 Penyerapan Dampak Portabel Dan Detektor Deformasi Vertikal - Peralatan Deteksi Runway Plastik

BS EN14808 Penyerapan Dampak Portabel Dan Detektor Deformasi Vertikal - Peralatan Deteksi Runway Plastik

Hubungi Sekarang
Produk
rincian produk
Produk

Peralatan Pengujian Baterai

Uji lingkungan Chamber

ruang uji iklim

Ruang Kelembaban Suhu

Lampu Cap Gauge

Peralatan Uji

Peralatan Uji IP

Alat Uji IEC62368

Alat Uji Medis

Peralatan Uji Flame

pengujian peralatan cahaya

Pasang Socket Tester

Alat uji listrik keselamatan

Peralatan Uji Kabel

kamar uji debu

Mesin Pengukur Gambar

Sistem Pengujian Motor Listrik

Audio Analyzer
IEC 61347-1:2024 Annex H Insulating Barrier Test Equipment with 0.5 N ± 0.1 N Force and 1.25 Times Test Value for Electrical Safety
  • Nama
  • Nama
  • Nama
IEC 61347-1:2024 Annex H Insulating Barrier Test Equipment with 0.5 N ± 0.1 N Force and 1.25 Times Test Value for Electrical Safety
MOQ: 1
harga: To be quoted
kemasan standar: kotak alat plastik saty atau paket kayu lapis
Periode pengiriman: 35 hari kerja
metode pembayaran: T/t
Kapasitas Pasokan: 200 per bulan
Informasi Rinci
Deskripsi Produk
Informasi Rinci
Tempat asal
CINA
Nama merek
kingpo
Sertifikasi
ISO 17025
Nomor model
IEC 61347-1:2024 Lampiran H
Kuantitas min Order:
1
Harga:
To be quoted
Kemasan rincian:
kotak alat plastik saty atau paket kayu lapis
Waktu pengiriman:
35 hari kerja
Syarat-syarat pembayaran:
T/t
Menyediakan kemampuan:
200 per bulan
Menyoroti

IEC 61347-1:2024 Annex H Insulating Barrier Test Equipment

,

0.5 N ± 0.1 N Force Electrical Safety Tester

,

1.25 Times Test Value IEC 61347-1 Test Electrode

Deskripsi Produk
IEC 61347-1:2024 Annex H Insulating barrier test ,Figure H.1 – Test electrode
H.1 General requirements
Solid insulation in direct contact with sharp edges of live parts of printed circuit boards used below a printed circuit and that are used to fulfil the requirements for double or reinforced insulation shall be tested according to Clause H.2 to simulate the stress produced by the soldered part in the printed circuit board.
H.2 Insulating barrier test
The insulating material used to fulfil the requirements for double or reinforced insulation shall be placed between two opposing electrodes. One electrode shall be a flat brass or stainless-steel surface that is placed in contact with the surface of the insulation material to be tested.
The second electrode consists in a cylindrical brass or stainless-steel rods with shape and dimensions according to Figure H.1 .
The electrodes shall be pressed against the insulation material with a force of 0,5 N ± 0,1 N.
The test potential between the two electrodes shall be increased to the test value and the maximum test potential shall be maintained for 1 min. The test value shall be 1 ,25 times the value for double or reinforced insulation as in Table 10.
No flashover or breakdown shall occur during the test.
IEC 61347-1:2024 Annex H Insulating Barrier Test Equipment with 0.5 N ± 0.1 N Force and 1.25 Times Test Value for Electrical Safety 0
IEC 61347-1:2024 Annex H Insulating Barrier Test Equipment with 0.5 N ± 0.1 N Force and 1.25 Times Test Value for Electrical Safety 1
IEC 61347-1:2024 Annex H Insulating Barrier Test Equipment with 0.5 N ± 0.1 N Force and 1.25 Times Test Value for Electrical Safety 2








Tag: 

mesin uji ketahanan abrasi,

tv signal tester,

penganalisa keselamatan listrik

Tautan cepat
Rumah Produk Tentang kami Berita Kasus Hubungi kami
Kontak Cepat

Alamat

RM C, 13 / F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK

Telp

86-769- 81627526

13712225112
Surat Kabar Kami
Langganan buletin kami untuk diskon dan banyak lagi.
Kebijakan pribadi |  Sitemap  | Cina Kualitas Baik Peralatan Pengujian Baterai Pemasok. Hak Cipta © 2017-2025 KingPo Technology Development Limited . Seluruh hak cipta.