 |
Environmental Formaldehyde Testing Equipment VOC Pretreatment Room
Detail produk:
| Place of Origin: | China |
| Nama merek: | KingPo |
| Sertifikasi: | Calibration Certificate |
Syarat-syarat pembayaran & pengiriman:
| Minimum Order Quantity: | 1 |
|---|---|
| Harga: | To be quoted |
| Kemasan rincian: | paket karton pengaman atau kotak kayu lapis |
| Waktu pengiriman: | 35 hari kerja |
| Payment Terms: | T/T |
| Menyediakan kemampuan: | 3 Set Per Bulan |
|
Informasi Detail |
|||
| Tempat asal: | Guangdong, Tiongkok (daratan) | Kisaran suhu: | 22 ℃ ~ 25 ℃ ± 2,0 ℃ (suhu yang dapat disesuaikan) |
|---|---|---|---|
| Kisaran kelembaban:: | 45~50%RH±5% | Kecepatan angin: | di bawah 0,3 m/dtk |
| Menyoroti: | suhu dan kelembaban ruang,kamar uji iklim |
||
Deskripsi Produk
VOC Pretreatment Room
Product purpose
Pretreatment room can provide standard temp.,humidity and voc clean environment.After temp. humidity,pressure and voc of testing materials are released in balance,pollutant release rate and release properties of material and products will be tested.
Principles
Place materials and products or their samples in the pretreatment room, and adjust indoor temperature,relative humidity,wind speed,pressure,indoor voc cleanliness conditions and other environmental conditions,so that temperature and humidity of test samples can reach consensus,and internal and external pressure of them in balance.Meanwhile,crossed contamination of test samples should be avoided (crossed contamination of TVOC release and crossed contamination of single unit VOC)
Range of temp. and humidity:
22℃~25℃±2.0℃(adjustable temperature)
45~50%R.H.±5%,wind speed under 0.3m/s
VOCS is required to be air intake volatility.
Organic concentration should nor exceed the following indexes
| items | Max( μg/m³)15 |
| Benzene | 20 |
| Acetaldehyde | 10 |
| Toluene | 20 |
| Ethylbenzene | 20 |
| Xylene | 20 |
| Styrene | 5 |
| P-dichlorobenzene | 5 |
| Tetradecane | 5 |
| Acetone | 10 |
| TVOC | 350 |
Note:
1. No pollutant source in the surrounding environment.
2. Power:AC380V 20KW(this power is set for one set of machine unit,and general power shall accumulate if the inner volume is relatively big and 2 or 3 machine units are adopted.)
